Electrical Equipment Cubicle - Swegon COMPACT Unit Installation And Maintenance Instructions Manual

20.3 Electrical Equipment Cubicle

The electrical equipment cubicle contains two units: the
control unit and the power unit.
On the COMPACT Unit, the control unit is positioned
behind the cover plate of the heat exchanger. This must be
dismantled to gain access.
The power unit is positioned behind the control unit.
The power unit in the COMPACT Unit is accessible after
removing the junction hood from the top of the air han-
dling unit.
On the COMPACT Top unit, remove the cover plate by the
cable entries in the air handling unit's extract air duct. See
the illustration.
COMPACT Unit
COMPACT Top
56 www.swegon.com
Power unit
Control unit
Power unit
Control unit
Registered design. The company reserves the right to make design changes without prior notice.
GB.COMPACTUT.170622