Spare Parts And Accessories - Siemens PPU 26x.3 series Manual

See also
Other values/standards: Application planning (Page 35)
7.1.6

Spare parts and accessories

Accessories pack (for delivery ex works)
Component
USB cable
Mounting element with
screws
Slide-in labels
Blank film for slide-in labels
Product Information
Spare parts and accessories
Component
Emergency Stop button 22 mm actuating element, 40 mm mush‐
Contact block
Set of tension jacks
Spare parts for these components can be found here: Spare parts (Spares on Web)
(www.siemens.com/sow)
Printing customized slide-in labels
Siemens provides a symbol library with key symbols. Customers can print the slide-in labels
using the A4 blank films included in the accessory pack. The blank films contained in the
accessory pack are already precut to the correct length.
Siemens also provides a template file to print customized key labels. Copy the symbols from
the symbol library to the required key position in the template.
PPU and components
Manual, 10/2015, 6FC5397-2DP40-5BA3
Description
Connection between PPU and MCP USB (length 0.8 m)
Mounting the MCP USB
Slide-in labels for turning, milling
Creation of customized slide-in labels
Product information for the MCP USB
Description
room pushbutton, snap action with tam‐
per protection, latching, red, with hold‐
er, non-illuminated
With 2 contact pairs (1 NO + 1 NC), 2-
pin, screw terminal (3rd contact pair can
be additionally connected)
Set of tension jacks for supplementary
operator components (2.5 mm profile,
20mm length)
Connectable components
7.1 MCP 483 USB
Amount
Amount Article number
1 3SB3000-1HA20
1 3SB3400-0A
9 6FC5248–0AF14–0AA0
1
6
1
1
1
109