Troubleshooting - Philips HQ8890 Manual

ENGLISH
12
C
shaver. Do not throw the batteries away with the
normal household waste, but hand them in at an
official collection point.You can also take the
batteries to a Philips Service Centre, which will
dispose of them in an environmentally safe way.
Only remove the batteries if they are completely
empty.
1 Remove the mains plug from the socket
and pull the appliance plug out of the
shaver.
2 Let the shaver run until it stops, undo the
screws and open the shaver.
3 Remove the batteries.
Do not connect the shaver to the mains again
after the batteries have been removed.

Troubleshooting

1 Reduced shaving performance
Cause 1: the shaving heads are dirty.
B
The shaver has not been rinsed long enough or
B
the water used was not hot enough.
Clean the shaver thoroughly before you
continue shaving (see 'Cleaning').
Cause 2: long hairs are obstructing the shaving
B
heads.