Advertisement
6
Troubleshooting
Problem
The appli ance
does not shave
as well as it
used to.
The appliance
does not work
when I press the
on/off button.
Water is leaking
from the bottom
of the appliance.
00.061.0574.2 APA SU5799, SU5999 Atlas IBBSDFU China A6 BW.indd 6
00.061.0574.2 APA SU5799, SU5999 Atlas IBBSDFU China A6 BW.indd 6
English
Possible cause
The shaving heads are
damaged or worn.
Hairs or dirt obstruct the
shaving heads.
The appliance is still
connected to the wall
socket. For safety reasons,
the appliance can only be
used without cord.
The rechargeable battery
is empty.
The travel lock is
activated.
The shaving unit is soiled
or damaged to such an
extent that the motor
cannot run.
The shaving heads are
damaged or worn.
During cleaning, water
may collect between the
inner body and the outer
shell of the appliance.
Solution
Replace the shaving
heads.
Clean the shaving heads
by following steps of
the thorough cleaning
method.
Unplug the appliance
and press the on/off
button to switch on the
appliance.
Charge the battery.
Press the on/off
button for 3 seconds
to deactivate the travel
lock.
Clean the shaving heads
or replace them.
Replace the shaving
heads.
This is normal and not
dangerous because all
electronics are enclosed
in a sealed power unit
inside the appliance.
27-09-21 11:55
27-09-21 11:55
Advertisement
