With the engine turned off:
1. Move the sidestand down.
2. Turn the main switch on.
3. Keep the front or rear brake applied.
4.
Push the start switch.
Does the engine start?
NO
YES
With the engine still off:
5. Move the sidestand up.
6. Keep the front or rear brake applied.
7.
Push the start switch.
Does the engine start?
YES
NO
With the engine still running:
8. Move the sidestand down.
Does the engine stall?
YES
NO
The system is OK. The vehicle can be
ridden.
WARNING
The vehicle must be placed on the
centerstand during this inspection.
If a malfunction is noted, have a
Yamaha dealer check the system
before riding.
The sidestand switch may not be
working correctly.
The vehicle should not be ridden until
checked by a Yamaha dealer.
The brake switch may not be working
correctly.
The vehicle should not be ridden until
checked by a Yamaha dealer.
The sidestand switch may not be
working correctly.
The vehicle should not be ridden until
checked by a Yamaha dealer.
5-25