Yamaha XMAX Owner's Manual page 34

The maximum time that can be shown
is 99:59.
To reset the time tripmeter, select it by
pushing the "TRIP" switch, and then
push the "TRIP" switch for three sec-
onds.
1. Fuel reserve tripmeter
When approximately 2.4 L (0.63 US
gal, 0.53 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter will start flashing. The display
will automatically change to the fuel re-
serve tripmeter "F Trip" and start
counting the distance traveled from
that point. In this case, push the "TRIP"
switch to switch the display in the fol-
lowing order:
F Trip Oil Trip V-Belt Trip
Trip Trip Time
To reset the fuel reserve tripmeter, se-
lect it by pushing the "TRIP" switch,
and then push the "TRIP" switch for
three seconds.
The fuel reserve tripmeter will reset au-
tomatically and disappear after refuel-
ing and traveling 5 km (3 mi).
1
1
1. Oil change indicator "Oil"
2. Oil change tripmeter
5-6
The oil change tripmeter shows the
distance traveled since the oil was last
changed.
The oil change indicator "OIL" flashes
F Trip
at the initial 1000 km (600 mi), then at
4000 km (2400 mi) and every 5000 km
(3000 mi) thereafter to indicate that the
engine oil should be changed.
After changing the engine oil, reset the
oil change indicator and the oil change
tripmeter. To reset them both, select
the oil change tripmeter, and then push
the "TRIP" switch for three seconds.
While the oil change tripmeter is flash-
ing, push the "TRIP" switch for 15 to 20
seconds. Release the "TRIP" switch,
and the oil trip value will reset to zero.
If the engine oil is changed before the
oil change indicator comes on (i.e., be-
2 fore the periodic oil change interval has
been reached), the oil change tripmeter
must be reset for the oil change indica-
tor to come on at the correct time.