Yamaha XMAX Owner's Manual page 38

To reset the average speed display,
select it by pushing the "INFO" switch,
and then push the "INFO" switch for
three seconds.
This function displays a warning mes-
sage corresponding to the current
warning.
"L FUEL": Appears when the last seg-
ment of the fuel meter starts flashing. If
"L FUEL" is displayed, refuel as soon
as possible.
"H TEMP": Appears when the top seg-
ment of the coolant temperature meter
starts flashing. If "H TEMP" is dis-
played, stop the vehicle, then stop the
engine, and let the engine cool.
"ICE": Appears when the icy road
warning indicator " " starts flashing. If
"ICE" is displayed, be careful of icy
roads.
"OIL SERV": Appears when the oil
change indicator "OIL" starts flashing.
If "OIL SERV" is displayed, change the
engine oil, and then reset the oil chan-
ge indicator and oil change tripmeter.
"V-BELT SERV": Appears when the V-
belt replacement indicator "V-Belt"
starts flashing. If "V-BELT SERV" is
displayed, replace the V-belt, and then
reset the V-belt replacement indicator
and V-belt replacement tripmeter.
When there are two or more warnings,
the warning messages are displayed in
the following order:
L FUEL H TEMP ICE OIL SERV
VBELT SERV L FUEL
5-10
1
2
3
1. Dimmer/Pass switch " / /PASS"
2. Turn signal switch " / "
3. Horn switch " "
1
2
3
1. Stop/Run/Start switch " / /
2. Hazard switch " "
3. "TRIP/INFO" switch
EAU1234M
"