Table of Contents
Advertisement
Section 4 - Maintenance
2.
Install the anode assembly with the washer into the intercooler end cover and tighten securely.
3.
Unplug and connect the seawater inlet hose, or open the seacock if equipped.
Without sufficient cooling water, the engine, the water pump, and other components will overheat and suffer damage. Provide
a sufficient supply of water to the water inlets during operation.
4.
Ensure that the seawater pickup pump is supplied cooling water.
5.
Start the engine and check for leaks.
Lubrication
Throttle Cable
Lubricate the pin and throttle cable surfaces with oil.
a
Tube Ref No.
SAE Engine Oil 30W
80
Shift Cable
Lubricate the pivot points and guide contact surfaces.
a
Page 52
a -
Anode
a
50781
b
52809
Description
b
13347
NOTICE
Throttle cable lubrication
a -
Pin
b -
Throttle cable
Where Used
Ball pin and throttle cable end contact surfaces
Typical inboard model shift cable and transmission linkage
a -
Pivot points
b -
Guide contact surface
Part No.
Obtain Locally
90-8M0133568
JUNE 2017
eng
Advertisement
Table of Contents
Troubleshooting
