Lubrication; Throttle Cable - Mercury MerCruiser MCM 454 Mag MPI Service Manual

SERVICE MANUAL NUMBER 23
TRANSMISSION COLD
NOTE: For ease of checking the oil prior to engine start-up, a cold oil level mark can be
made. To find the cold oil level mark, the oil level must first be set according to the warm oil
level checking procedure.
1. Let the boat sit overnight. Insert clean dipstick and read level.
2. Put a mark on the dipstick at the cold oil level.
NOTE: You can use the new mark to check the oil level when cold. If oil level adjustment
is needed, add oil to the new mark. This procedure can be performed by the builder, dealer
or owner to ease fluid checking procedure.

Lubrication

Throttle Cable

MCM AND MIE MODELS
Index Index
90-861326--1 MARCH 1999
Downloaded from https://needmanual.com/
a
454 / 502 Mag / 8.2L MPI Models
7.4L MPI Models
a - Pivot Points
b - Guide Contact Surface
b
a
b
MAINTENANCE
a
72791
75454
Page 1B-33