Table 7-1 Micromaster 430 Performance Ratings - Siemens MICROMASTER 430 Manual

7 MICROMASTER 430 specifications
Table 7-1
Feature
Mains Operating Voltage
& Power Ranges
Input Frequency
Output frequency
Power Factor
Inverter Efficiency
Overload Capability for
variable torque (VT)
Inrush Current
Control Method
Pulse Frequency
Fixed Frequencies
Skip Frequencies
Setpoint Resolution
Digital Inputs
Analog Input 1
Analog Input 2
Relay Outputs
Analogue Output
Serial Interface
Electromagnetic Compatibility
Braking
Protection Level
Temperature range (VT)
Storage Temperature
Humidity
Operational Altitudes
Protection Features
Standards
CE Marked
86
www.eltra-trade.com
MICROMASTER 430 Performance Ratings
Specification
3 AC 380 to 480 V ± 10 %
VT
47 to 63 Hz
0 Hz to 650 Hz
≥ 0.7
96 to 97 %
40 % for 3 s and 10 % for 60 s within 5 minutes in terms of the nominal output
current
Less than rated input current
Linear V/f control, Linear V/f control with FCC, Parabolic V/f control, Multi-point
V/f control, V/f control for textile applications, V/f control with FCC for textile
applications, V/f control with independent voltage setpoint
2 kHz to 16 kHz (2 kHz steps)
15, programmable
4, programmable
0.01 Hz Digital, 0.01 Hz Serial, 10 bit Analogue
(motor potentiometer 0.1 Hz [0.1% (in PID mode)])
6, programmable (isolated), switchable active high / active low (PNP/NPN)
0 - 10 V, 0 - 20 mA and –10 V to +10 V
0 - 10 V and 0 - 20 mA
3, programmable 30 V DC / 5 A (resistive), 250 V AC 2 A (inductive)
2, programmable (0 to 20 mA)
RS-485, optional RS-232
Optional EMC filters to EN 55011 Class A or B,
also Internal Class A filters available selected units
DC braking, Compound braking
IP20
-10 °C to +40 °C (14 °F to 104 °F)
-40 °C to +70 °C (40 °F bis 158 °F)
< 95 % RH – non-condensing
Up to 1000 m above sea level without derating
Undervoltage , Overvoltage, Overload, Ground Faults, Short circuit, Stall
Prevention, Motor Blocking Protection, Motor Overtemperature, Inverter
Overtemperature, Parameter Interlock
UL, cUL, CE, C-tick
Conformity with EC Low Voltage Directive 73/23/EEC
and Electromagnetic Compatibility Directive 89/336/EEC
7.50 kW – 90.0 kW (10.0 hp – 120 hp)
MICROMASTER 430 Operating Instructions
6SE6400-5AC00-0BP0
info@eltra-trade.com
+421 552 601 099