Safety Warning - KB Electronics Penta Power KBRG-212D Installation And Operation Manual

2

SAFETY WARNING

Definition of Safety Warning Symbols
Electrical Hazard Warning Symbol: Failure to observe this warning could result in
electrical shock or electrocution.
Operational Hazard Warning Symbol: Failure to observe this warning could result in
serious injury or death.
This product should be installed and serviced by a qualified technician, electrician, or electrical
maintenance person familiar with its operation and the hazards involved. Proper installation, which
includes electrical connections, mounting and adequate enclosure, fusing or other current protection, and
grounding can reduce the chance of electrical shocks, and/or fires in this product or products used with this
product, such as electric motors, switches, coils, solenoids, and/or relays. Do not use this drive in an
explosion-proof application. Eye protection must be worn and insulated adjustment tools must be used
when working with drive under power. This product is constructed of materials (plastics, metals, carbon,
silicon, etc.) which may be a potential hazard. Proper shielding, grounding, and filtering of this product can
reduce the emission of radio frequency interference (RFI) which may adversely affect sensitive electronic
equipment. The input circuits of this drive may not be isolated from the AC line. Be sure to read and follow
all instructions carefully. Fire and/or electrocution can result due to improper use of this product.
The drive may contain electronic start/stop circuits, which are used for "Start" and "Stop" functions.
However, these circuits are never to be used as safety disconnects since they are not fail-safe. Use only
the AC line for this purpose.
It is the responsibility of the equipment manufacturer and individual installer to supply this Safety Warning
to the ultimate end user of this product. (SW 7/2009)
This product complies with all CE directives pertinent at the time of
manufacture. Contact our Sales Department for Declaration of Conformity. Installation
of a CE approved RFI filter is required. Additional shielded cable and/or AC line cables
may be required along with a signal isolator.
SAFETY WARNING! Please read carefully before proceeding.
5