72
de
en
8. Ausbau des Kindersitzes
Zum ausbau des recaro Zero.1 elite heben sie
den hebel isofiX-längenverstellung (14) an der
Vorderseite des Kindersitzes an und ziehen den
Kindersitz ein stück nach vorne. nun drücken
sie die hellgrauen Knöpfe der isofiX-entriege-
lungshebel (18) nach unten und entriegeln die
1
isofiX-Konnektoren durch Ziehen dieser hebel,
wie dargestellt, auf beiden seiten. Jetzt können
sie den recaro Zero.1 elite aus dem fahrzeug
2
nehmen.
der stützfuß kann nun eingeklappt werden.
8. Removing the child seat
to remove the recaro Zero.1 elite lift the
isofiX-length adjustment lever (14) on the front
of the seat and pull the child seat slightly forward.
now press down the light gray buttons of the iso-
fiX-release lever (18) and release the isofiX-con-
nectors by pulling the levers, as pictured, on both
sides. now you can remove the recaro Zero.1
elite from your vehicle.
the support leg can now be folded.
Need help?
Do you have a question about the Zero.1 Elite and is the answer not in the manual?
Questions and answers