Canon iPF800 Series Service Manual page 313

Display massage Code*
Roll feed unit err 03060B00-2E24
Turn off printer and
check roll feed unit
Unknown file. 03900001-4049
Check file format.
Turn off printer, wait a
while, then turn it on
again.
Unknown file. 03900001-4042
Check file format.
Turn off printer, wait a
while, then turn it on
again.
Hardware error. 03130031-2F2B
03130031-2F2B
Turn off printer, wait,
then turn on again.
Printhead error 03800200-2802
Open top cover and
replace the printhead.
Printhead error 03800300-2801
Open top cover and
replace the right
printhead.
Printhead error 03800400-2803
Open top cover and
replace the right
printhead.
Hardware error. 03800500-2F2F
03800500-2F2F
Turn off printer, wait,
then turn on again.
Hardware error. 03800500-2F30
03800500-2F30
Turn off printer, wait,
then turn on again.
Ink tank is empty. 03810104-2500
Press OK and replace ink
tank.
Ink tank is empty. 03810101-2501
Press OK and replace ink
tank.
Ink tank is empty. 03810102-2502
Press OK and replace ink
tank.
Ink tank is empty. 03810103-2503
Press OK and replace ink
tank.
Ink tank is empty. 03810106-2506
Press OK and replace ink
tank.
Ink tank is empty. 03810106-2507
Press OK and replace ink
tank.
Ink insufficient. 03810204-2580
Press OK and replace ink
tank.
Ink insufficient. 03810201-2581
Press OK and replace ink
tank.
Ink insufficient. 03810202-2582
Press OK and replace ink
tank.
Ink insufficient. 03810203-2583
Press OK and replace ink
tank.
Ink insufficient. 03810206-2586
Press OK and replace ink
tank.
Ink insufficient. 03810204-2590
Press OK and replace ink
tank.
Condition detected
Roll feed unit failure
ROM data for another model has been transferred.
MIT data transfer failure
LF operation failure
Invalid printhead installed
Printhead DI compensation failure
Printhead EEPROM error
Non-discharging error
Non-discharging position adjustment error
Bk ink tank empty
Y ink tank empty
M ink tank empty
C ink tank empty
MBk ink tank empty
MBk2 ink tank empty
Low on the Bk ink tank (as during cleaning)
Low on the Y ink tank (as during cleaning)
Low on the M ink tank (as during cleaning)
Low on the C ink tank (as during cleaning)
Low on the MBk ink tank (as during cleaning)
Low on the Bk ink tank (during pre-printing checks) Replace with a fully replenished Bk ink tank
Action
Replace the roll feed unit.
Transmit valid ROM data.
Verify the validity of MID data before transferring it.
Check to see if paper has not jammed.
Check the feed motor and feed roller.
Replace printhead
Replace printhead
Replace printhead
Identify the head management sensor unit
Replace the head management sensor unit
Replace the printhead
Identify the head management sensor unit
Replace the head management sensor unit
Replace the printhead
Renew the Bk ink tank
Renew the Y ink tank
Renew the M ink tank
Renew the C ink tank
Renew the MBk ink tank
Renew the MBk ink tank
Replace with a fully replenished Bk ink tank
Replace with a fully replenished Y ink tank
Replace with a fully replenished M ink tank
Replace with a fully replenished C ink tank
Replace with a fully replenished MBk ink tank
Chapter 8
8-7