Canon iPF800 Series Service Manual page 186

Chapter 4
d) Operation panel
Removing the operation panel
1) To remove operation panel [1], open the upper cover and raise the ejection guides. Remove two claws [2] using a flat head screwdriver and release connector [3]
and ground wire [4].
[3]
e) Upper left cover/upper right cover
Removing the upper left cover/upper right cover
1) To remove upper left/upper right cover [1], remove left/ right circle cover (L), left/ right circle cover (S) and left/ right side covers.
2) Insert a flathead screwdriver at the indicated position to remove hook [2].
f) Right front cover
Removing the right front cover
1) To remove right front cover [1], remove right circle cover (L), right circle cover (S), right side covers, upper right cover the operation panel.
2) Remove two screws [2].
4-6
[4]
[2]
[2]
[1]
[2]
F-4-9
F-4-10
[1]
F-4-11
[2]
[1]