Canon iPF800 Series Service Manual page 189

1) To open the ink tank units, remove right circle cover (L), right circle cover (S), right side covers, upper right cover and right ink tank cover unit.
2) Remove two screws [1].
3) Remove two screws [4] from the support plate [3], and then loosen four screws [5] and slide the support plate to open the ink tank unit.
l) Left rear cover
Removing the left rear cover
1) Remove four screws [1] to remove left rear cover [2].
[3]
[5]
[4]
[2]
[5]
[1]
F-4-18
[1]
[1]
F-4-19
[3]
[4]
[2]
Chapter 4
4-9