Canon iPF800 Series Service Manual page 312

Chapter 8
Display massage
Hardware error.
03130031-2E22
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2E23
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2E25
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2E26
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2E27
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2E1F
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2E2A
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2E29
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2E2E
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-4027
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2E13
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2F32
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2F3A
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2F3B
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-260E
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-2618
Turn off printer, wait,
then turn on again.
Hardware error.
03130031-260F
Turn off printer, wait,
then turn on again.
8-6
Code*
03130031-2F22 Pump travel timeout
03130031-2F23 Purge motor error
Pump inoperable
03130031-2F25 Unable to detect the carriage motor home position
03130031-2F26 Carriage inoperable
03130031-2F27 Carriage travel timeout
03130031-2F1F Pump cam sensor error
03130031-2F2A Unable to detect the feed roller home position
03010000-2F29 Feed motor timeout (Roll media)
03130031-2F2E Roll travel timeout
03130031-4027 Lift travel timeout error
03130031-2F13 A/D converter external trigger output stop detection
hardware error 1
03130031-2F32 Multi sensor error
03130031-2F3A Valve motor error
03130031-2F3B CS communication error
03130031-260E Gap detection error
03130031-2618 VH voltage error
03130031-260F Gap reference surface error
Condition detected Action
Check the purge unit.
Check the purge unit.
Check the carriage unit. Check the linear encoder for
smears.
Check the carriage unit and surrounding parts.
Check the carriage unit and surrounding parts.
Check the purge unit.
Check the feed roller encoder and surrounding part.
Check to see if paper has not jammed.
Check the roll feed unit. Check roll media. Check to see
if paper has not jammed in the printer.
Check the roll feed unit.
Check the carriage unit and surrounding parts.
Replace the new printhead.
Check the environment for interferences from outside
light.
Replace the multi sensor unit.
Check the ink supply unit.
Remove the ink tanks and then reload them.
Check the main controller PCB.
Check the carriage unit and surrounding parts.
Replace the main controller PCB.
Check the power supply unit.
Replace the reference surface sheet.