Canon iPF800 Series Service Manual page 167

b. LEVEL 1
Moving the printer on a floor with difference in grade or by truck
Item
[MOVE PRINTER] on the Main menu Perform [LEVEL 1].
Allowed tilting angle
Ink consumption
Ink tank
Separation of main unit and stand
Maintenance cartridge
Replacement of consumable parts
Service support
Transportation procedure
1) If there is a message instructing to replace the maintenance cartridge or check the remaining ink, replace the maintenance cartridge.
2) Remove the paper and roll holder.
3) From [Main menu] > [Maintenance] > [MOVE PRINTER], select [LEVEL 1].
4) Press the [OK] key and perform [LEVEL 1] MOVE PRINTER.
5) If the consumable parts counter is checked and a message to replace consumable parts appear, check the consumable parts counter from service mode and replace
the necessary consumable part.
See "d. Replacing consumable parts during transportation."
Repeat [LEVEL 1] after replacing consumable parts and resetting the counter.
6) When MOVE PRINTER completed message appears, turn off the power, and remove the power cord and interface cable.
7) Open the upper cover and raise the ejection guide.
T-3-2
Lengthwise: -30 to +30 degrees
Rotation: -10 to +10 degrees
No ink is consumed.
It may be installed or removed.
They do not need to be separated.
Install.
There is no need to open a new maintenance cartridge.
However, if there is a message instructing to replace the maintenance cartridge or check the remaining ink,
replace with new maintenance cartridge before transporting.
Replacement of consumable parts and resetting of counter may be necessary.
If consumable parts must be replaced, service support is necessary.
F-3-8
Description
Chapter 3
3-5