Items recyclable using conventional methods
•
Aluminum: Front panel, exterior side and rear panels, robotics, cartridge and drive bays,
carousel and shroud panels
•
Stainless steel: Robot guides
•
Steel: Frames, fasteners
•
Plastic: Windows, cartridge magazines, tape cassettes
•
Copper: Internal wiring, motors, SCSI cables
•
Paper: Manuals
Items requiring special disposal due to lead-based solder
•
Printed circuit boards: Controller card, miscellaneous small printed circuit boards
Items that may have salvage or resale value
•
Tape drives
•
EMI line power filter
Qualstar is committed to the implementation of RoHS (Restriction of the use of certain hazardous
substances in electrical and electronic equipment) in accordance with the European Directive. The
compliance date is July 1, 2006, at which time Qualstar will certify that its tape library products are
compliant with the RoHS standard.
Qualstar tape libraries are classified as "Information Technology Storage Array Systems" for which
the RoHS Directive provides an exemption for lead solder until the year 2010. Until Qualstar
replaces lead-based solder with lead-free solder, affected subassemblies must be disposed of
appropriately.
The best source for service-related information is your system reseller. Alternately, you can reach
the Qualstar Technical Support Department at:
iv
Reduction of Hazardous Substances (RoHS)
Technical Support
1267 Flynn Road
Qualstar Corporation
Camarillo, CA 93012
Phone: (805) 416-7055
Monday - Friday 7:00 AM - 4:00 PM PST
Toll Free: (877) 886-2758
Phone: (805) 853-7744
After hours
option 4
E-mail: support@qualstar.com
E-mail: sales@qualstar.com
www.qualstar.com
501804 Rev. 07-01-19