Intended Use - RADEMACHER RolloTron Standard Series Operating And Assembly Manual

i

4.1 Intended use

Only use the roller shutter belt winder...
...to open and close flat roller shutters with an approved
belt.
IMPORTANT
Mechanical locks of any kind are not suitable for automated
operation with this device.
Only use original spare parts
from RADEMACHER.
◆ This avoids the risk of malfunctions and damage to
your roller shutter belt winder.
◆ As the manufacturer, we provide no guarantee for the
use of third-party components and accept no liability
for consequential damage resulting from such.
◆ All repairs to the roller shutter belt winder must be
undertaken by authorised customer service personnel.
80
Operating conditions
◆ Only operate the roller shutter belt winder in dry
rooms.
◆ A 230 V / 50 Hz power supply, together with a site-
provided isolating device (fuse, MCB), must be perma-
nently available at the installation location.
◆ An easily accessible 230 V / 50 Hz socket must be avail-
able at the installation site if the enclosed connecting
cable with mains plug is being used.
◆ The roller shutters must run up and down smoothly
and should not stick.
◆ The mounting surface for the roller shutter belt winder
must be flat.
EN