Delta AS Series Operation Manual page 186

A S S e r i e s O p e r a t i o n M a n u a l
However, you can force an input contact ON or OFF during a test. Click an input or output contact to set,
right-click the contact, point to Force, and click On (X/Y), Off (X/Y), Release (X/Y), or Release All. If you force
an input or output contact ON or OFF, a lock symbol appears at the left side of the contact.
Force
On (X/Y)
Off (X/Y)
Release (X/Y)
Release All
If you force an output contact in the program ON or OFF, the program execution result does not affect the
output state of this contact.
_6
*. If you disable the online monitoring function, the contacts are not automatically released from the locked states.
You must check whether the contacts need to be released from the locked states after you complete the test.
You can create a monitoring table online or offline.

Method 1
On the PLC menu, click New Devices Table, or
6 - 3 2
Force the selected input or output contact ON
Force the selected input or output contact OFF
Release the contact from the locked state
Release all the contacts from the locked states
Description
on the toolbar.