Western Digital Ultrastar Data102 User Manual page 175

User Guide
d. Press the crossbar against the CMA mounting bracket and secure the crossbar in place by
pressing and turning the thumbscrew clockwise until snug.
a. Check that the crossbar is fully secured to the CMA mounting bracket by pulling on the
bar to ensure it does not move.
Step 47 : Cable the CMA(s).
CMA Standard:
a. Unlatch the elbow side of the arm(s) by pressing the blue button labeled "push," and then
swing the arm(s) open.
Figure 190: Swinging Motion of Crossbar to Locking Position
Figure 191: Tightening the Thumbscrew
4. Part Replacement
4.9 Chassis Replacement
165