2-Port 10-Gigabit Ethernet Modular Port Adapter With Xfp - Cisco ASR 9000 Series Installation Manual

Overview
Amber On Modular port adapter power is on and good, and modular port adapter is being configured.

2-Port 10-Gigabit Ethernet Modular Port Adapter with XFP

The 2-Port 10-Gigabit Ethernet (GE) modular port adapter (MPA) provides two cages for XFP Ethernet optical
interface modules that operate at a rate of 10 Gbps. The two XFP modules can be 10GE multimode or single
mode connections.
Each XFP cage on the 4-Port 10GE MPA has an adjacent A/L (Active/Link) LED visible on the front panel.
The A/L (Active/link) LED indicates the status of the associated XFP port, as described in the below table
2-Port 10-Gigabit Ethernet MPA LEDs, and a Status LED for the MPA as shown in the following figure.
Figure 26: 2-Port 10-Gigabit Ethernet Modular Port Adapter
1 A/L (Active/Link) LED 2 Status
LED
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
2-Port 10-Gigabit Ethernet Modular Port Adapter with XFP
55