Port 100-Gigabit Ethernet Line Card With Cfp - Cisco ASR 9000 Series Installation Manual

Overview

2-Port 100-Gigabit Ethernet Line Card with CFP

2-Port 100-Gigabit Ethernet Line Card with CFP
The 2-Port 100-Gigabit Ethernet (GE) line card provides two CFP cages for CFP Ethernet optical interface
modules that operate at a rate of 100 Gbps. The two CFP modules can be 100GE multimode connections.
The line card is available in either an -SE (Service Edge Optimized) or -TR (Packet Transport Optimized)
version. All versions are functionally equivalent, but vary in configuration scale and buffer capacity.
Each CFP cage on the 2-Port 100GE line card has an adjacent Link LED visible on the front panel. The Link
LED indicates the status of the associated CFP port, as described in Line Card LEDs, on page 138.
The following figure shows the 2-Port 100GE line card front panel and LEDs.
Figure 13: 2-Port 100-Gigabit Ethernet Line Card
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
37