Cisco ASR 9000 Series Installation Manual page 57

Overview
Figure 18: 4-Port 100-Gigabit Ethernet Line Card with QSFP28
1
2
Note If the 4-port 100GE line card is inserted in a chassis, it is important to use filler panels that have two screens
[A9K-LC-FILR-V2]. This ensures optimal cooling and EMI.
12-Port 100-Gigabit Ethernet Line Card with QSFP28
The 12-Port 100-Gigabit Ethernet (GE) line card provides twelve ports for QSFP28 modules that operate at
a rate of 100 Gbps.
Each line card has a single tristate Status LED to display card status. Each QSFP28 port on the line card has
a port status LED visible on the front panel. The LEDs are described in
following figure shows the 12-Port 100-GE line card front panel and LEDs.
Ejector lever (one of two)
Status LED
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
12-Port 100-Gigabit Ethernet Line Card with QSFP28
3 Four 100GE QSFP28
connectors
4 Captive installation screw
(one of two)
Line Card LEDs, on page 138. The
43