National Instruments MXI-Express x1 Series User Manual page 102

Appendix C Specifications for Legacy Products
CE Compliance
This product meets the essential requirements of applicable European Directives, as amended
for CE marking, as follows:
Low-Voltage Directive (safety)
Electromagnetic Compatibility
Directive (EMC)
Refer to the Declaration of Conformity (DoC) for this product for any
Note
additional regulatory compliance information. To obtain the DoC for this product,
visit
ni.com/certification
the appropriate link in the Certification column.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the Minimize Our Environmental Impact web
page at
ni.com/environment
directives with which NI complies, as well as other environmental information not included in
this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
a WEEE recycling center. For more information about WEEE recycling centers,
National Instruments WEEE initiatives, and compliance with WEEE Directive
2002/96/EC on Waste and Electronic Equipment, visit
.
weee
(RoHS)
environment/rohs_china
go to
ni.com/environment/rohs_china
Cleaning
If you need to clean the module, use a soft, nonmetallic brush. Make sure that the module is
completely dry and free from contaminants before returning it to service.
C-22 | ni.com
. This page contains the environmental regulations and
At the end of the product life cycle, all products must be sent to
National Instruments
National Instruments
73/23/EEC
89/336/EEC
, search by model number or product line, and click
RoHS
(For information about China RoHS compliance,
.)
ni.com/environment/
ni.com/