Basic Mxi-Express X1 Systems - National Instruments MXI-Express x1 Series User Manual
Mxi-express x1 multisystem extension interface for pci, pci express, compactpci/compactpci express, expresscard, and pxi/pxi express bus computers, ni pci-8361, ni pxi-8361, ni pxi-8368, ni pci-8366, ni pxi-8364, ni pxie-8360, ni pcie-8361, ni pxi-8366, n
Table of Contents
Advertisement
Figure 1-11. NI ExpressCard-8360 (198266x-01L) Block Diagram
MXI-Express x1
The NI ExpressCard-8360 (Part Number 192290x-01) has the same
Note
architecture as the 198266x-01L version, except that it uses a signal buffer instead of
a PCI Express switch.
Basic MXI-Express x1 Systems
The simplest MXI-Express x1 system can consist of a host board
installed in the controller slot of a chassis or integrated port of a chassis. Some example
configurations are shown in Figure 1-12, and Table 1-2 lists all connectivity options going from
a host PC to a chassis.
1
For more information refer to the
Copper
Terminology
PCIe
PCIe Gen 1 x1
Switch
section of Chapter 2,
MXI-Express x1 Series User Manual
PCIe Gen 1 x1
1
connected to a target board
Getting
Started.
© National Instruments | 1-9
1
Advertisement
Table of Contents
