Table of Contents
Advertisement
Specifications
Real-Time
MPEG-4 AVC
Ultracompression
Encoder
iPlex Installation and Hardware Specification Guide
Mechanical
Height:
0.509 inches
Width:
2.913 inches
Depth:
5.866 inches
Connectors:
37 Pin Micro-D Connector, BNC
Indicators
RDY—Ready Green LED
ACT—Active Green LED
Power Off or Not Initialized
MPEG Encoder enabled, no video present on selected
input: C2/C or C1/Y/SDI
MPEG Encoder enabled, video present on selected
input: C2/C or C1/Y/SDI
The Real-Time MPEG-4 AVC Ultracompression Encoder submodule can receive
both Standard Definition and High Definition uncompressed digital video
through a variety of input interfaces and compress it to MPEG-4 Part 10 (H.264).
The following physical input options are offered:
•
HD card: encoders fitted with this interface can accept HD-SDI and SD-SDI input signals (on
the same physical BNC interface).
NOTE
HD operation requires a license key.
•
SD card: encoders fitted with this interface only accept SD signals. The interface options are
Composite, S-Video, and SD-SDI, in the exact same arrangement as the MPEG-2 Encoder
Plus and the H.264 Advanced Encoder.
•
The encoder supports up to six audio stereo pairs, depending on the selected
audio compression scheme. The first two audio pairs can be analog-balanced or
unbalanced signals, connected through the 37-pin micro-D connector. When
using AES signals, the 37-pin micro-D connector allows for up to four stereo
pairs. The remaining channels are only available as embedded audio in the HD-
SDI or SD-SDI interface.
NOTE
The audio cables used in the MPEG-2 Encoder Plus and in the
Advanced Encoder are compatible with this module.
State
RDY
ACT
Off
Off
On
Off
On
Flashes
43
Hide quick links:
Advertisement
Table of Contents
