Asiout Submodule - Ericsson TANDBERG Television iPlex N20001 Installation Manual

Indicators
RDY—Ready Green LED
ACT—Active Green LED
Power Off
LED test for approximately 8 seconds,
following power up and board configu-
ration.
ASI In Port disabled
ASI In Port enabled, no ASI In traffic
ASI In Port enabled, ASI In traffic
ASIOut
The ASIOut submodule is distinguished by its label (ASIOUT) and by an orange
line around the BNC connectors. Looking at the interface view of the card, you
Submodule
can see BNC connectors and activity LEDs.
Specifications
Mechanical
Height:
Width:
Depth:
Connectors:
Indicators
RDY—Ready Green LED
ACT—Active Green LED
iPlex Installation and Hardware Specification Guide
State RDY
Off
On
Flash-
ing
On
On
0.509 inches
2.913 inches
5.866 inches
BNC
ACT
Off
On
Off
Off
Flash rate proportional
to MPEG TS packet rate
ASI OUT
1A
RDY ACT
1B
2A
RDY ACT
2B
39