Ieee 802.1X Overview - Avaya 9600 Series Installing And Administering

Phone administration
Parameter name
L2QAUD
L2QSIG
PHY2PRIO

IEEE 802.1X overview

The IEEE 802.1X standard provides specifications on layer 2 network secure access. Phones
implement 802.1X Supplicant in unicast and multicast mode, and pass-through mode and proxy
logoff feature for the attached device on the PC port.
The following configuration parameters are applicable to this feature:
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Default value
6
6
0
Deskphones SIP
Comments on this document? infodev@avaya.com
Description
Specifies the value of the VLAN priority portion of
the VLAN tag when the phone generates tagged
Ethernet frames from the internal CPU of the
phone. These values are inserted into the VLAN
tag for audio frames, for example, RTP, RTCP,
SRTP, and SRTCP. All other frames, except
those specified by the L2QSIG parameter, are
set to priority 0.
Valid values are from 0 to 7.
L2QAUD is configured through:
• A SET command in the 46xxsettings.txt
file
• LLDP
Specifies the value of the VLAN priority portion of
the VLAN tag when the phone generates tagged
Ethernet frames from the internal CPU of the
phone. These values are inserted into the VLAN
tag for signaling frames, for example, SIP. All
other frames, except those specified by the
L2QAUD parameter, are set to priority 0.
Valid values are from 0 to 7.
L2QSIG is configured through:
• A SET command in the 46xxsettings.txt
file
• LLDP
Specifies the layer 2 priority value to be used for
frames received on the secondary Ethernet
interface when VLAN separation is enabled.
Valid values are from 0 to 7.
PHY2PRIO is configured through the
46xxsettings.txt file.
68