Test Equipment - Agilent Technologies X Series Manual

T E
EST QUIPMENT
The table below summarizes the test equipment needed to perform all of the functional tests. Alternate
equipment model numbers are given in case the recommended equipment is not available. If neither the
recommended nor the alternative test equipment are available, substitute equipment that meets or
exceeds the critical specifications listed.
Analyzer
Option Item
Adapters
All 3.5 mm (f) to 3.5mm (f)
(connector saver for
source)
All BNC (f) to SMA (m)
All Type N (f) to Type N (f)
All Type N (m) to 3.5 mm (m)
All Type N (m) to 3.5 mm (f)
All Type N (f) to 3.5 mm (f)
All Type N (m) to BNC (f)
Attenuators
All 10 dB Step Attenuator
All 10 dB Fixed Attenuator (2
required)
Pxx 30 dB Fixed Attenuator
Cables
All 3.5 mm (1 meter)
Chapter 1
Critical Specifications
Frequency: 10 MHz to 26.5 GHz
VSWR: < 1.1:1
Frequency: 40 MHz
Frequency: 10 MHz to 18 GHz
VSWR: < 1.05:1
Frequency: 10 MHz to 18 GHz
VSWR: < 1.1:1
Frequency: 10 MHz to 18 GHz
VSWR: < 1.1:1
Frequency: 10 MHz to 18 GHz
VSWR: < 1.1:1
Frequency: 10 MHz to 1 GHz
VSWR: < 1.05:1
Frequency: 50 MHz
Range: 0 to 70 dB
Frequency: 50 MHz
VSWR: < 1.2:1
Accuracy: < 0.05 dB @ 50 MHz
Frequency: 10 MHz to 26.5 GHz
VSWR: < 1.4:1
Loss: < 2.0 dB
Functional Tests

Test Equipment

Alternate
Recommended
Agilent
Agilent Model
Model
1250-1749
83059B
1250-1200
1250-1472 1250-0777
1250-1743
1250-1744
1250-1745
1250-1476
8495A 8496A
8493C Option 010 8493A
Option 010
or
8493B
Option 010
11708A
11500E 8120-4921
11