Table of Contents
Advertisement
1.1 Checklist
Check the contents of your package for following parts:
FGSW-2620CS x1
Quick Installation Guide x1
User's Manual CD x1
Power Cord x 1
Rubber Feet x 4
Two Rack-mounting Brackets with Attachment Screws x1
If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton
including the original packing material, and use them against to repack the product in case there is a need to return it to
us for repair.
In the following section, the term "Web Smart Switch" means the Switch device, ie. FGSW-2620CS; term of "switch"
can be any third switches.
1.2 About the Switch
The FGSW-2620CS provide 24 10/100Mbps Fast Ethernet ports and two Gigabit Ethernet ports, either TP or
SFP per port. The two Gigabit ports either can be 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX
through SFP (Small Factor Pluggable) interfaces. The distance can be extended from 100 meters (TP), 550
meters (Multi-mode fiber), up to above 10/20/30/40/50/70/120 kilometers (Single-mode fiber).
The FGSW-2620CS equipped with non-blocking 8.8Gbps backplane, greatly simplifies the tasks of upgrading
your LAN for catering to increase bandwidth demands.
For efficient management, the FGSW-2620CS 24-Port 10/100Mbps + 2 Gigabit TP / SFP Combo Web Smart
Switch is equipped with remote Web interface. The FGSW-2620CS can be programmed for advanced switch
management functions such as port configuration, port-based / IEEE 802.1Q / MTU VLAN, port mirroring, port
trunk, QoS, bandwidth control, broadcast storm control, STP, RSTP, configuration backup/recovery, MAC
address / TCP & UDP filter and IGMP Snooping v1/v2.
The FGSW-2620CS provide port-based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN in-
cluding overlapping). The VLAN groups allowed on the FGSW-2620CS, will be maximally up to 26 for
port-based / 32 for IEEE 802.1Q VLAN groups. Also the MTU VLAN divide port 1 to port 24 as separate LAN
group and only can access the public port 25,26 or port 26. Via supporting port trunking, the FGSW-2620CS
allow the operation of a high-speed trunk combining multiple ports. The FGSW-2620CS also provide two
groups of up to 4-ports 10/ 100Base-TX trunk support, up to 800Mbps bandwidth per trunk and 1 group of
2-Port 10/100/1000Mbps trunk support, up to 2000Mbps bandwidth per trunk, and it supports fail-over as well.
With its Auto-Negotiation capability, all the RJ-45/UTP ports of Web Smart Switch can be configured to speeds
of 10/20Mbps / 100/200Mbps (Fast Ethernet) and 1000/2000Mbps (Gigabit Ethernet) automatically. In addi-
tion, the products are equipped with the MDI/MDI-X auto detection for easily plug and play connection,
regardless of cabling types-straight through or crossover.
User's Manual of FGSW-2620CS
1. INTRODUCTION
- 5 -
Advertisement
Table of Contents
