Table of Contents
Advertisement
FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)
Impact on the System
The operation of the RH2288 system or devices may be interrupted.
Preparations
Tools: Phillips screwdriver, small-sized flat-head screwdriver, ESD gloves, marker
Materials: spare RH2288 server
Documents: documents delivered with the RH2288 server, management system initial
configuration table, monitoring device layout diagram
Skill requirement: weak-current engineer
Procedure
Step 1 Press and hold the power switch on the front panel of the RH2288 server for about 5s to
power off the server, and disconnect the power plug.
Step 2 Mark cables and ports on the RH2288 server using a marker.
Step 3 Remove all cables connected to the RH2288 server.
Step 4 Remove the faulty RH2288 server using a Phillips screwdriver and install a new RH2288
server.
Figure 5-21 Installing the RH2288 server
Step 5 Reconnect the cables and the power plug.
Step 6 Press and hold the power switch on the front panel of the RH2288 server for about 5s to
power on the server, and check that the RH2288 server is working properly.
Issue 04 (2018-01-05)
A spare RH2288 server of the same model is available and functional.
For the diagrams and tables, see the initial configuration parameter manual for the solution in use.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Components Replacement
95
Advertisement
Table of Contents
