Maintenance And Troubleshooting; Safety Information Relating To Maintenance And Troubleshooting; Maintenance Plan - Phoenix Mecano RK Rose+Krieger Easywork Operating Instructions Manual

6

Maintenance and troubleshooting

6.1 Safety information relating to maintenance and troubleshooting

Improperly performed maintenance
and troubleshooting

6.2 Maintenance plan

Maintenance intervals
29.05.2019
WARNING!
Risk of injury due to improperly performed mainte-
nance and troubleshooting work!
Improper maintenance and troubleshooting work can
lead to injury and property damage.
– Before starting work, pull the mains plug and
ensure that there is sufficient space for assembly.
– Ensure that the assembly site is kept clean and
tidy at all times! Components and tools lying
around or on top of one another are sources of
accidents.
– If components have been removed, ensure that
they are assembled correctly, reinstall all the fixing
elements and adhere to the screw tightening tor-
ques.
– Observe the following before re-commissioning:
–
–
The following sections describe the maintenance work which is
required for optimum and fault-free operation.
If increased wear is noticeable during regular inspections, shorten
the required maintenance intervals according to the actual signs of
wear.
If you have any questions about the maintenance work and inter-
vals, contact RK Rose+Krieger GmbH
Maintain components provided by the operator regularly according
to the specifications provided by the respective manufacturers.
Assembly workstation RK Easywork
Ensure that all maintenance and trouble-
shooting work has been performed and com-
pleted according to the specifications and infor-
mation in this manual.
Ensure that nobody is still in the danger zone.
Ä page 62.

Maintenance and troubleshooting

Maintenance plan
93