Transport And Storage - Phoenix Mecano RK Rose+Krieger Easywork Operating Instructions Manual

Assembly workstation

Available languages

Transport and storage

Transport inspection

Transport

29.05.2019

NOTICE!

The assembly workstation must not be commissi-

oned if the lifting column is damaged.

Immediately check the delivery upon receipt to ensure that it is

complete and free from transport damage. Report the extent of the

damage to the person responsible and to RK Rose+Krieger GmbH

immediately.

WARNING!

Risk of injury due to improper transport!

Loads can swing out, topple over and fall during lifting

operations. This can cause severe injuries.

–

Never step under or into the pivoting range of sus-

pended loads.

–

Only use approved lifting gear and load suspen-

sion devices with a sufficient load-bearing capacity.

–

Do not place load-bearing equipment, such as

lifting straps and belts, over sharp edges and cor-

ners. Do not knot or twist them.

–

Lift the assembly workstation carefully and observe

whether it topples. If necessary, adjust the fas-

tening.

–

Be aware of the assembly workstation's centre of

gravity.

–

Wear an industrial hard hat.

Assembly workstation RK Easywork