Brandson 303824/20190809NB113 User Manual page 59

Caution! Do not allow petrol, brake fluids, aggressive oils etc. to come
in contact with plastic parts. Chemicals can damage, weaken or destroy
plastic parts, which can lead to serious injuries.
Replacing the carbon brushes
You have the option to replace the carbon brushes. For this purpose,
open the upper or lower compartment of the carbon brushes ( and
9)
remove it after switching off and disconnecting the device. Replace the
carbon brushes and insert the new ones into the compartment.
In any case, make sure that the contacts of the carbon brushes are in-
serted properly, otherwise the device will not start!
9. Storage
Before storing the device, make sure that it has been cleaned. Store the
device in a dry, well-ventilated place out of reach of children. Keep the
device away from corrosive substances such as garden chemicals and
salts.
CAUTION!
10. Safety instructions and disclaimer
Please do not try to open the device to carry out repairs or modifications.
Avoid contact with the mains voltage. Do not short-circuit the product.
The device is not waterproof. Please use it only in dry surroundings. Pro-
tect it from high humidity, water and snow.
Keep the device away from high temperatures.
Do not expose the device to sudden changes in temperature or strong
vibrations, as this could damage the electronic components. Check the
device for any damage before using it. The device should not be used
if it was subject to impact or has been damaged in some other manner.
Please comply with the local regulations and restrictions. Do not use the
device for purposes other than those described in the user manual.
59
English