Brandson 303824/20190809NB113 User Manual page 53

Remove any protective covers. Make sure that sensitive objects are not
damaged once a tool bit is inserted. Make sure that the "On / off switch"
is switched off and the speed switch is on thelowest setting.
When using the multi-functional tool, hold the device firmly to operate it
properly. The multi-functional tool is now ready for use. Then insert the
desired tool bit. To start the device, press the "On / Off switch" to posi-
tion "A". Now select the desired speed carefully using the speed switch.
CAUTION!
• Do not cover the air vents or the intake opening!
• Certain dusts are considered carcinogenic. Always ensure
that the work place has good ventilation. Follow the applica-
ble local regulations regarding the machining of materials!
• Materials containing asbestos should only be machined by
professionals!
• Avoid dust accumulation at the workplace. Dust can easily
ignite.
• Always grip the device firmly! Ensure secure footing when
using the device.
6. Tool bits
Do not use faulty or worn out tool bits under any circumstances as this
can result in serious injuries and property damage.
Use only tested accessories from specialist shops for the power tool.
Make sure that the accessories are approved for a rpm of 32000 and that
the maximum outer diameter is 3.2 mm.
53
English