Brandson 303824/20190809NB113 User Manual page 58

7. Usage
Hold the device firmly with both hands. Use the product only if you have
completely read and understood the user manual and all the relevant
safety instructions. Use it only for the intended purpose.
Selecting the speed
Level
1
2
3
4
5
6
Find out about the special instructions. before machining the correspond-
ing materials, for example, you should machine materials with a low melt-
ing point only at low speeds, otherwise there is a risk that the material
may deform. Materials such as wood should be machined at high speeds.
Note: In order to avoid damage, it is recommended to use a maximum
speed of approx. 15000 rpm for polishing, grinding and cleaning work.
Turning the device on and off
You can switch the device On (I position) or Off (0 position) using the "On
/ Off" switch.
8. Cleaning and Care
Avoid the use of solvents for cleaning plastic parts. Many plastics are
susceptible to damage from various types of commercial solvents and
may be damaged by their use.
Always use clean cloths for cleaning to remove dirt, dust, oil, grease, etc.
Never immerse the device in water!
Keep clean the power tool and the air vents clean to work in a better
and safer manner.
58
Speed
about 10000 min-1
about 15000 min-1
about 21500 min-1
about 24500 min-1
about 28000 min-1
about 32000 min-1
English