Brandson 303824/20190809NB113 User Manual page 55

Dismantling the tool bits
Loosen the clamping nut (17) as described in the chapter "Mounting tool
bits" and remove the tool bit from the device.
Mounting the wheel or grinding attachments
• The delivery includes various wheel or grinding attachments which
you can use with the device. You need the retaining pin (2) to use
these attachments.
• Insert the retaining pin (2) into the tool holder as described in the
previous section.
• Keep the spindle locking button (14) pressed and remove the screw
on the retaining pin (2) completely using a screwdriver or with the
back side of the wrench.
• Place the desired wheel or grinding attachment on the retaining pin
(2) and tighten the previously removed screws of the retaining pin.
English
55