Brandson 303824/20190809NB113 User Manual page 56

Changing the collet
• Press the spindle locking button (14) and rotate the clamping nut
(17) by hand, until it is blocked.
• Keep the spindle lock pressed and loosen the clamping nut (17) using
the wrench and then remove the clamping nut (17) along with the
chuck (16).
• Then insert the new collet. Make sure you choose the correct size for
the desired application.
• Slightly screw the clamping nut (17) including the new collet (16)
using the wrench in clockwise direction.
56
English