SEM 0100 Operation And Maintenance Manual page 6

4) Insert handle and tighten set screw using the 5mm Hex L-Key. For best results, only allow handle to extend
about one inch out of back side of hole.
Note: SEM has included two handles (long and short handle).
IMPORTANT: Long handle MUST be used when crushing hard drives. The short handle is for use with SSDs.
5) The machine is now ready to operate.
Warning: While operating the Model 0100 hard drive crusher, pieces of material will break and can potentially
become airborne due to the force. See your internal safety officer and ask about your PPE for area of operation.
We recommend wearing safety glasses.
508.366.1488 | www.semshred.com
6