Barco wePresent WiPG 1600 User Manual page 23

<DHCP Server Setup>
<Note: Auto-Configuration Network Setup on WiPG-1600>
The default setting of the wePresent WiPG-1600 as DHCP server. When the wePresent WiPG-
1600 is connected to a LAN that already has a DHCP server, the wePresent WiPG-1600 uses an IP
address assigned by the server. When the wePresent WiPG-1600 is connected to a LAN that does
not have a DHCP server, the wePresent WiPG-1600 becomes the DHCP server in the network.
< Gatekeeper>
Gatekeeper function is designed for ensuring the enterprise network security within wePresent
WiPG-1600.
<Apply >: Press "Apply" button after configuration, and follow the reboot instruction
<Cancel>: Press button to abort action.
21
•
If "auto" option is selected, the WiPG-1600 will auto disable the DHCP server setup
when the existing DHCP server is detected. "Disable" option can also be selected.
When "Auto" option is chosen, the below information can be entered or kept as
default setting.
Start IP: 192.168.100.11
End IP: 192.168.100.254
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.100.10
DNS Server: 192.168.100.10
•
"All Block" can block Guest Users (through wireless) from accessing all office network
(LAN)
•
"All Pass" can allow Guest Users (through wireless) access all of office network
•
"Internet Only" can block Guest Users (through wireless) from office network (LAN)
but still reserve internet connection capability
when applicable.
7
Web Management
© wePresent 2017
WIPG-1600-USER-GUIDE-01