Conference Control - Barco wePresent WiPG 1600 User Manual

Table of Contents

7.2 Conference Control

Please select the "Windows Utility" or "Mac Utility" and execute the installation program.

Note: Please disable the "Smart Screen Filter" on IE browser; otherwise file may not be

downloaded.

Download the Device Profile on your Windows or Mac laptop, double click the .wipg profile.

The wePresent utility will launch automatically and connect to this device without further

operation.

Select "Conference Control" function, The current connected user list can be found on this page.

Verify the lock

on the start page is disabled.

Enter password and then press [Login]. (default password: moderator)

After login, User List can be found on the screen, which indicates all of the users connected to

wePresent WiPG-1600 box.

The default setting is "allow control from this page only". When this function is checked, the

moderator can control all of the connected users' projections.

There are three columns, "Name", "Play Control" and "IP Address".

a. Play Control: There are seven buttons, including Screen# Full

Screen#2

, Screen#3

b. Moderator can click on the "Full" button to allow full screen projecting.

c. M oderator can assign which user to project in a specific quadrant by clicking on the screen

numbers.

d. Moderator can "stop" the projecting or remove the user anytime.

Web Management

, Screen#4

, Stop

and Remove

,Screen #1

WIPG-1600-USER-GUIDE-01

Table of Contents