Nakayama MB2000 Owner's Manual page 9

Pictogram illustration and explanation
1. Caution! Read the instruction manual and follow the warning and safety
instructions!
2. Do not use the appliance in wet weather conditions!
3. Danger! Rotating blades. Keep hands and feet out of openings while machine
is running.
4. Keep bystanders away from the danger zone!
5. Danger! Keep hands and feet away from the cutting equipment!
6. Caution! Always wear eye protection and earmuffs!
7. Caution! Unplug immediately if the power cord or plug becomes damaged!
8. Always switch off the appliance, disconnect the power and wait till the
machine comes to a standstill prior to maintenance, cleaning or repair work!
Description
1. Safety switch / Mains plug
2. Cable relief
3. Handle bar
4. Connection bar
5. Bar lower section
6. Motor housing
7. Fender
8. Wheels / Rear skid
9. Tines
Safety instructions
Read the operating instructions and act accordingly. Keep it for general use.
Comply with the safety information and the warning on the appliance.
Before operation
 The appliance must be assembled correctly before use.
 The appliance should be checked carefully before use. You should only work
with an appliance that is in good condition. If you notice any defect on the
machine that may cause danger to the operator, do not operate the appliance until
defects are rectified.
 Replace worn or damaged parts for safety. Use only original spare parts. Parts not
produced by manufacturer may cause poor fit and possible injury.
 Before use, all foreign bodies must be removed from the lawn, also pay attention
to foreign bodies during the operation.
 Only work in daylight or sufficiently good artificial light.
 Wear eye protection and face or dust mask if operating in dusty conditions.
9
www.NakayamaTools.com