Table of Contents
Advertisement
9
info@Fluke-Direct.com
Maintenance
The calibration instrument has been designed with the utmost care. Ease of operation
●
and simplicity of maintenance have been a central theme in the product development.
Therefore, with proper care the instrument should require very little maintenance. Avoid
operating the instrument in dirty or dusty environments.
If the outside of the instrument becomes soiled, it may be wiped clean with a damp cloth
●
and mild detergent. Do not use harsh chemicals on the surface, which may damage the
paint.
The calibrator should be handled with care. Avoid knocking or dropping the calibrator.
●
If the mains supply cord becomes damaged, replace it with a cord with the appropriate
●
gauge wire for the current of the instrument. If there are any questions, call an
Authorized Hart Scientific Service Center (see Section ) for more information.
Before using any cleaning or decontamination method except those recommended by
●
Hart, users should check with an Authorized Hart Scientific Service Center (see Section )
to be sure that the proposed method will not damage the equipment.
If the instrument is used in a manner not in accordance with the equipment design, the
●
operation of the instrument may be impaired or safety hazards may arise.
Fluke-Direct
9 Maintenance
.com
1.888.610.7664
Advertisement
Table of Contents
