Technical Data - WAGNER FOLIATEC Spray system Manual

21. Technical Data

Max. viscosity:
Power source:
Power consumption:
Atomizing output:
Max. flow rate:
Double insulation:
Sound pressure level*:
Sound pressure output*:
Oscillation level*:
Air hose length:
Weight:
* Measured in accordance with EN 60745-1
Information about the oscillation level
The specified oscillation level has been measured according to a standard test
procedure and can be used to compare against electric tools.
The oscillation level is also for determining an initial assessment of the vibrational strain.
Attention! The vibration emission value can differ from the specified value when the
electric tool is actually in use, depending on how the electric tool is being used. It is
necessary to specify safety measures to protect the operating personnel. These measures
are based on an estimated shutdown during the actual conditions of use (all parts of the
operating cycle are taken into consideration here, for example periods when the electric
tool is switched off, and, when it is switched on but running without any load).
Warning
If the supply cord of this appliance is
damaged, it must only be replaced
by a repair shop appointed by the
manufacturer, because special purpose
tools are required.
Warning: Do not connect the blue
or brown wire to the earth
terminal of the plug! The
wires in this mains lead are
coloured in accordance with the following code:
As the colours of the wires in the mains lead of this appliance may not correspond with
03/2015
Technical Data
170 DIN-s
230 V , 50 Hz
~
630 W
200 W
200 ml/min
80 dB (A); Uncertainty K = 4 dB
93 dB (A); Uncertainty K =4 dB
< 2.5 m/s²; Uncertainty K = 1.5 m/s²
12 m
approx. 3.9 kg
blue = neutral brown = live
GB
25