Advertisement
Table of Contents
- 1 Table of Contents
- 2 Important Safety Information
- 3 Controls and Functions
- 4 Material Preparation
- 5 Assembly
- 6 Power and Material Controls
- 7 Spray Pattern Adjustment
- 8 Proper Spraying Technique
- 9 Proper Spraying Technique
- 10 Cleanup
- 11 Cleanup
- 12 Maintenance
- 13 Troubleshooting
- 14 Parts List
- 15 Limited Warranty
- Download this manual
2000
3000
flexio
2000 / 3000
™
Owner's manual • manuel de l'utilisateur •
eN
f
eS
manual de usariO
read this manual fOr cOmplete instructiOns •
lire ce manuel pOur Obtenir des directives cOmplÈtes •
français - p. 16
lea este manual para Obtener las instrucciOnes cOmpletas
espaÑOl - p. 30
wagner-group.com
0517 • Form No. 0520701A
Advertisement
Table of Contents
Related Manuals for WAGNER Flexio 2000
Summary of Contents for WAGNER Flexio 2000
- Page 1 • lire ce manuel pOur Obtenir des directives cOmplÈtes • français - p. 16 lea este manual para Obtener las instrucciOnes cOmpletas espaÑOl - p. 30 wagner-group.com 0517 • Form No. 0520701A...
-
Page 2: Table Of Contents
iMPoRTANT SAfeTY iNfoRMATioN TABle of CoNTeNTS GRoUNDiNG iNSTRUCTioNS ImportANt SAFety INFormAtIoN ........... 2-3 this product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by CoNtrolS ANd FuNCtIoNS ............4-5 providing an escape wire for the electric current. this product mAterIAl prepArAtIoN .............. -
Page 3: Important Safety Information
iMPoRTANT SAfeTY iNfoRMATioN SAfeTY hAzARDS • Never expose the equipment to rain. Store indoors. HaZarD: EXPLOSiOn Or FirE • Keep electrical cord plug and spray gun trigger free from paint and other liquids. Never hold the cord at plug Flammable vapors, such as solvent and paint connections to support the cord. -
Page 4: Controls And Functions
ThANk YoU foR YoUR PURChASe! thank you for purchasing the wagner FleXio sprayer with best-in-class features that are designed for spraying residential paint, un-thinned, indoors or out. only the FleXio sprayers have the power of the X-boost® turbine and versatility of the iSpray nozzle that will help you finish projects fast and professionally. - Page 5 CoNTRolS AND fUNCTioNS x-BooST™ PoweR DiAl the X-boost power dial adjusts the level of air power 3000 produced by the turbine. the FleXio sprayer model 2000 is equipped with a 2-speed air power control (hI / lo). the FleXio sprayer model 3000 is equipped with a 2000 variable speed air power control (1 - 12).
-
Page 6: Material Preparation
MATeRiAl PRePARATioN material to be sprayed may need to be strained to remove any impurities in the paint which may enter and clog the system. Impurities in the paint will give poor performance and a poor finish. only thin the material if absolutely necessary to improve spray performance. optimal spray performance should be acheived simply by adjusting the various controls on the unit. -
Page 7: Assembly
ASSeMBlY NeVer point the spray gun at any part of the body. ASSeMBlY make sure the power cord is unplugged. Attention Insert the suction tube into the intake opening. Align the pickup tube: a If spraying downward, the angled end of the pickup tube should be pointing toward the front of the nozzle. -
Page 8: Power And Material Controls
PoweR AND MATeRiAl CoNTRolS Spray performance will depend upon a number of factors: material thickness, air power, spray pattern selected, and material flow. testing different variations of the control settings will help you achieve the desired results. See descriptions and suggested power and material Settings guide below to help with your project. x-BooST™... -
Page 9: Spray Pattern Adjustment
SPRAY PATTeRN ADjUSTMeNT ADjUST SPRAY ShAPe AiR CAP eARS AiR CAP Adjust the spray pattern by turning the air cap ears. the air cap position will determine the movement direction of the spray gun. the positions of the air cap and the corresponding spray pattern shapes are illustrated below. -
Page 10: Proper Spraying Technique
PRoPeR SPRAYiNG TeChNiqUe SPRAY PoSTeR the room you are spraying must be properly A spray poster is included with your unit. the spray poster can STOP masked in order to prevent overspray from be adhered to a spraying surface and can be used for practice. covering woodwork, floors or furnishings. -
Page 11: Proper Spraying Technique
PRoPeR SPRAYiNG TeChNiqUe use the images and guidelines below in order to assist you in achieving the desired spray pattern for your project. these are meant to be general starting points - you may have to slightly modify certain controls on the system in order to get the exact performance you need. -
Page 12: Cleanup
CleANUP when cleaning, use the appropriate cleaning solution (warm, soapy water for latex materials; mineral spirits for oil-based materials). flUShiNG The UNiT PULL Special cleanup instructions for use with flammable solvents (must have a flashpoint above 100ºF (38ºC): • Always flush spray gun outside. •... -
Page 13: Cleanup
CleANUP (CoNTiNUeD) CleANiNG The Nozzle make sure power cord is unplugged. push the tab below the trigger, twist and separate the nozzle from the turbine. wipe the exterior of the cup and nozzle until clean. iSpray nozzle only - a. remove the air cap (a) by prying it off the connecting nut (inset). -
Page 14: Maintenance
MAiNTeNANCe CleANiNG The filTeRS before every use, you should inspect the air filters in the turbine to see if it is excessively dirty. If it is dirty, follow these steps to replace it. Attention Never operate your unit without the air filters. dirt could be sucked in and interfere with the function of the unit. -
Page 15: Troubleshooting
TRoUBleShooTiNG PRoBleM CAUSe SolUTioN Problem a: Little or no material flow 1. Nozzle clogged. 1. Clean. 2. Suction tube clogged. 2. Clean. 3. Air vent on suction tube blocked. 3. Clean (see page 13) 4. material flow setting too low. 4. -
Page 16: Parts List
Parts List • Liste de Pièces • Lista de Piezas X-Boost™ turBine • turBine de X-Boost™ • turBina de X-Boost™ replacement parts available by calling customer service On peut obtenir des pièces de rechange en appelant le Service à la clientèle. Los repuestos están disponibles llamanado al servicio a clientes. - Page 17 Parts List • Liste de Pièces • Lista de Piezas isPray nozzLe • Buse de isPray • BoquiLLa de isPray Part no. English Français Español Qty. nº de piéce Description Description Descripción Qte. Pieza no. cant. 0520006 Spray gun assembly (includes ensemble de pistolet (inclut ensamblaje de pistola (incluye items 1-7)
- Page 18 Parts List • Liste de Pièces • Lista de Piezas Part no. English Français Español Qty. nº de piéce Description Description Descripción Qte. Pieza no. cant. 0529276 Nozzle assembly (includes ensemble de buse (inclut des ensamblaje de boquilla items 1-9) pièces 1 à...
-
Page 19: Limited Warranty
De AToMizACióN De PiNTURA hvlP este producto, fabricado por la wagner Spray tech Corporation (wagner), está garantizado contra defectos de materiales y de mano de obra por un año a partir de la fecha de compra siempre y cuando se utilice de acuerdo con las recomendaciones e intrucciones impresas de wagner. esta garantía no cubre daños ocasionados por el uso incorrecto, accidentes, negligencia por parte del usario o el desgaste normal. - Page 20 2000 3000 ™ wagner-group.com...