Description/ Scope Of Delivery; Field Of Application; Coating Materials Suitable For Use; Coating Materials Not Suitable For Use - WAGNER FOLIATEC Spray system Manual

•
Before working on the device, remove the power plug from the socket.
•
Cover areas that are not to be sprayed. When working keep in mind that wind, for
example, may transport paint mist over great distances and cause damage.
•
Do not lay the spray gun.
With original WAGNER/FOLIATEC accessories and spare parts, you have the guarantee
that all safety regulations are fulfilled.

4. Description/ Scope of delivery

1 Air cup
2 Nozzle
3 Union nut
4 Spray gun
5 Trigger
6 Material volume regulation
7 Air hose
8 Combined ON/OFF and speed switch
* This is inside the container: remove it before starting operations!

5. Field of application

The spray system was developed to process materials for the automotive area (in particular
spray film).

6. Coating Materials Suitable for Use

Spray film, water- and solvent-based paints, primers, 2-component, staining sealers and
wood sealer-preservatives.

7. Coating Materials Not Suitable for Use

Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances.

8. Preparation of the Coating Material

Please ensure that the processing instructions of the manufacturer of the
i
material are observed.
The enclosed spray gun can be used to spray paints that are undiluted or slightly diluted.
Detailed information is available in the data sheet of the manufacturer of the material
(enclosed).
1. Stir the material up and put the required amount into the paint container.
03/2015
Description/ Scope of delivery (Fig. 1)
9 Spray gun holder
10 Mains lead
11 Air filter cover
12 Container
13 Replacement air filter (2 pcs.)
14 Replacement nozzle seal*
15 Lubricating grease (without illustration)*
GB
19