Table of Contents
Advertisement
W 125
4. Description/ Scope of delivery
1) Air Cap
3) Union nut with material volume regulation 4) Trigger
5) ON/OFF switch
7) Container
5. Coating Materials
Glazes, Wood preservatives
Paints containing solvents and water-soluble paints, primers
Wall paints, materials that contain highly abrasive components, facade paint, caustic
solutions and acidic coating substances. Flammable materials.
Paints, varnishes and glazes can be sprayed undiluted or slightly diluted.
Paints, varnishes and glazes can be sprayed undiluted or slightly diluted.
Stir the material up and put the required amount into the paint container.
1.
2. If the convey capacity is too low, add 5 - 10% dilution step-by-step until the convey
capacity ful ls your requirements.
6. Start-up
Before connecting to the mains supply, be sure that the supply voltage is identical with
the value given on the rating plate.
•
Unscrew the container from the spray gun.
•
Aligning suction tube. (Fig. 2)
If the suction tube is positioned correctly, the container contents can be sprayed
without almost any residue.
When working on lying objects: Turn the suction tube forwards. (Fig. 2 A)
Spraying work when working on overhead objects: Turn the suction tube rearwards.
(Fig. 2 B)
•
Set the container on a sheet of paper, pour in the prepared coating material and screw
the container tightly onto the spray gun.
7. Adjusting the desired Spray Setting
WARNING! Danger of injury! Never pull the trigger guard while adjusting
the air cap.
Turn the air cap ( g. 3, 2) to the desired spray setting position (arrow).
Description/ Scope of delivery (Fig. 1)
Coating Materials Suitable for Use
Coating Materials Not Suitable for Use
2) Nozzle
6) Air lter
GB
undiluted
dilute by 5 - 10%
9
Advertisement
Table of Contents
