Table of Contents
Advertisement
WARNING
For example, there is a lag between
the driver's shifting and the new gear
number appearing on the display.
This lag could cause the driver to
downshift again, causing rapid and
excessive engine braking and possi-
bly an accident resulting in death or
injury.
NOTICE
■
To prevent damage to the engine
and its components
Do not let the indicator needle of
●
the tachometer enter the red zone,
which indicates the maximum
engine speed.
The engine may be overheating if
●
the engine coolant temperature
gauge is in the red zone (H). In this
case, immediately stop the vehicle
in a safe place, and check the
engine after it has cooled com-
pletely. (P.447)
Odometer and trip meter
display
■
Changing the display
Press the display change button
until the desired item is displayed.
■
Display items
Odometer
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
2-1. Instrument cluster
Displays the total distance the vehicle
has been driven.
Trip meter A/Trip meter B
Displays the distance the vehicle has
been driven since the meter was last
reset. Trip meters A and B can be used
to record and display different distances
independently.
To reset, display the desired trip meter
and press and hold the display change
button.
Meter light control
Displays the meter light control display.
• The brightness of the meter can be
adjusted separately for when the tail
lights are on and off.
• To adjust the brightness, display the
meter light control display and press
and hold the display change button.
Adjusting the clock (vehi-
cles without navigation/mul-
timedia system)
■
Adjusting the minute to "00"
1
Press
or
to select
the multi-information display.
2
Press
or
to select "Clock
: 00".
Press the
to set the clock to
the beginning of the nearest hour.
e.g.
1:00 to 1:29 1:00
1:30 to 1:59 2:00
93
2
of
Advertisement
Table of Contents
