Toyota Corolla Hybrid 2020 Owner's Manual page 196

194
4-3. Operating the lights and wipers
5
Increases the rain-sensing wind-
shield wiper sensitivity
6
Decreases the rain-sensing
windshield wiper sensitivity
7
tion
Wipers will automatically operate a cou-
ple of times after the washer squirts.
■
The windshield wiper and washer
can be operated when
The power switch is in ON.
■
Effects of vehicle speed on wiper
operation (vehicles with rain-sens-
ing windshield wipers)
Vehicle speed affects the Intermittent
wiper interval.
■
Raindrop sensor (vehicles with
rain-sensing windshield wipers)
The raindrop sensor judges the
●
amount of raindrops.
An optical sensor is adopted. It may
not operate properly when sunlight
from the rising or setting of the sun
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
Washer/wiper dual opera-
intermittently strikes the windshield, or
if bugs etc. are present on the wind-
shield.
● If the wiper is turned to AUTO mode
while the power switch is in ON, the
wipers will operate once to show that
AUTO mode is activated.
If the temperature of the raindrop sen-
●
sor is 85°C (185°F) or higher, or -15°C
(5°F) or lower, automatic operation
may not occur. In this case, operate
the wipers in any mode other than
AUTO mode.
■
If no windshield washer fluid
sprays
Check that the washer nozzles are not
blocked if there is washer fluid in the
windshield washer fluid reservoir.
■
Front door opening linked wind-
shield wiper stop function (vehicles
with rain-sensing windshield wip-
ers)
When AUTO mode is selected and the
windshield wipers are operating, if a
front door is opened while the vehicle is
stopped and the P shift position is
selected, operation of the windshield
wipers will be stopped to prevent any-
one near the vehicle from being sprayed
by water from the wipers. When the front
door is closed, wiper operation will
resume.
■
When stopping the hybrid system
in an emergency while driving
If the windshield wipers are operating
when the hybrid system is stopped, the
windshield wipers will operate in high
speed operation. After the vehicle is
stopped, operation will return to normal
when the power switch is turned to ON.